What do you do if an LED light is stuck on one color?
These are the typical steps to do that: Hold the power button for five seconds then turn off the power.
Wait for 3 seconds then turn it on for five seconds.
Repeat the 3 seconds off and five-second on the process for 4 times.
On the fourth time, wait for the LED strips to show alternate lights..
How do I reset my LED strip light?
To reset the light strip, locate the corded controller which is attached to the power supply of the light strip. Insert a paper clip, or a similar sized object, into the reset hole on the controller (depicted below). Using the paper clip, press and hold the reset button inside the reset hole for eight (8) seconds.
Why is only one side of my LED lights working?
(a) If the light output problem seems to be with a single LED element, that means that either that particular LED element is defective or its connection has been damaged on the PCB. Examine around the area of the bad LED and see if you can see any PCB damage.
Why won’t my LED lights change color?
Bad Pin Connection – If your LED strip light fails to turn on at all, then check your pin connections. … If your RGB strip lights won’t change colors try flipping your strip light around and reconnecting it. Incorrect Power Source – Make sure to double check which power source your lights require.
Why wont my LED lights turn red?
Check to make sure your connections are good for the red, but if what you are experiencing is that they are “almost turning red”, you may be suffering too high a voltage drop from your controller to the strip by using too small gauge wire. … if your led won’t turn red .